Seagate BlackArmor NAS 220 INCLUDES Two 1TB hard drives

Description

Seagate BlackArmor NAS 220
INCLUDES:
Two
Seagate Barracuda 1-TB drives
INCLUDES:
Power Adapter
INCLUDES:
Copy of
Installation software and documents
Unit has been reset to factory setting.
Default user & password (admin, admin) and in a RAID 1
configuration
Very low "mileage" on these hard drives.
It was used for approximately 11 months. It stored about 400gb of data and then taken off-line.
The  S.M.A.R.T. diagnoses shows both HD as "Healthy".
The CMOS battery has been replaced and is brand new.
One of the four rubber stick-on feet is missing.
NAS  is factory pre-configured with 'RAID 1' protection, mirrored drives. (
Gives 1TB storage
)
It can be re-configured as 'RAID 0' or 'SPAN' as JBOD (Just a Bunch of Disks)  (
Gives 2TB storage
)
If you wish to increase the capacity, this NAS can be upgraded to a total of 6TB
if you change out the hard drives
in the enclosure.
You may use up to 3TB drives in the enclosure (2 X 3TB=6 TB total)
One of the USB connections can be used as a print server for a USB Printer
The NAS can be configured as a media server.
Includes:
• BlackArmor server
• Two Seagate Barracuda 1TB drives (installed)
• Power adapter
• Copy of Installation CD (DVD), including software, product documentation